Tag Archives: costumes

I am a Robot ! Meep Beep Beep !

Standard

The craft storm continues here at our little house of lemons. With E’s costume, he wants to be a robot for Halloween. Not just any robot, “A big robot with missiles coming out of his chest!” Pretty tall order it seemed, until we realized he meant this guy from a family favorite Halloween themed video game Costume Quest.  I just love his idea, he’s dressing up as a kid in a robot costume. Too funny.

costumeQuest

The missile part comes from when the characters enter battle mode their costumes morph, and the Robot changes into this. when his special power is charged up he shoots shoots missiles at the bad trolls.

CostumeQuestbattlerobot

If you’re a gamer this is a great title to share with your kids, or are looking for a nice fun game for you kids, totally recommend it. Its a simple turn taking battles with world exploring. The main character has to save their sibling from the trolls, with the help of their friends and costumes.

Ok back to costume building…..

The challenge with this costume is our weather. We live in the Greater Vancouver area in Canada, so we get rain. In the winter its either raining, or just stopped raining or is about to rain. How would we do a cardboard costume in our climate?

Duck Tape !

hallor

and lots of it !

The whole outside of the boxes are covered in duck  tape, even the inside of the helmet.  The wings on the back as well as the front panel – where the missiles are – all tape. It was tedious work taping it all up, but E could help and feel that accomplishment of making his own costume. And it is totally water proof. He is so cute walking around in it !!

hallorobot5

The buttons on the front are mason jar rings covered with red tape, once again taped on. What I did to attach them all tidy like, was make a square of the silver duck tape, cut a hole in the middle about 1.5 mm smaller around than the mason ring. Insert the ring through the hole slightly stretching the tape around it, and press the square into place. It holds nicely both due to the stretching on the silver tape around the ring, and the little edge of the mason ring that catches ( so hard to describe and I didn’t take photos of the process.) Once in place I went around the side of the ring with a small strip of red tape, giving it a nice finished look and clean  line.

hallorobot2

The antenna is some sort of dollar store toy with a blinking Rudolph nose ‘taped’ to it. A mason ring was used again for the base. Mr. Lemons did that part, as well as the taping of the details on the back, all while I was out so I don’t know all the details of how the antenna was attached. There was tape involved for sure 😛

hallorobot

The arms are dryer venting from the local hardware store. It’s very flexible and shiny.  To attach the arms I only had to pop the venting into the arm holes and it stayed nicely. hallorobot4

The beat part is that E loves it! He has been playing with it non stop through the whole creation process, making all sorts of sound effects.  Beeps and Meeps and missile launching sounds. I’m starting to think that the tape not only makes it water proof but has added some strength to the costume.

Here is the detailing on the back. E got really excited when he showed me the work that he did with his Dad “It has wings and everything!”

hallorobot3

He will be having a Happy Halloween !

Advertisements

FirePower Mario

Standard

Our boys want to be game characters this Halloween. K chose his favorite Mario. (E’s costume post can be found here) I was excited Mario wouldn’t be too hard to pull together, some overalls and a red shirt. I figured a trip to the thrift store, a box store for the hat and Ta-Da Mario. I was wrong. I combed the whole thrift store not 1 pair of overalls.

When I told K that I would be sewing his costume he was so excited because that meant he could be FirePower Mario.

hallomaroi2

The pants pattern is blank slate pants, it really is my go to pattern. I adapted it to make it fit big in the tummy, because our plumber friend is a bit tubby, and drafted the bib and pockets.  Some sneaky snaps were added at the sides to keep Mario’s tummy stuffing in. The fit turned out ok, it is a bit odd fitting on the sides and even with the snaps there is on odd Gap. But all in all I’m pleased with the way they turned out.

hallomario5

It was really fun it whip it all up, there was lots of short cut taking so it was fast and fun. The fabric is an old curtain so I could use existing hems for the top of the pockets. Pocket ironing and adjusting can be so tedious. The backs pockets are short cut city,  a close zig-zag stitch was all that was used, no ironing nothing.  lol it only has to last a day. The other great short cut was the straps, no ironing or folding there either. Its the top hem of the curtain where you would put a rod threw them. I trimmed it off zig-zagged the raw edge and voila straps. If you look close enough you can even see that the buttons don’t match lol.

hallomario4

The hat on the other hand … not so quick and fun. I found the idea intimidating. See I was concerned about the how Mario’s hat sort of stands up a bit, and its sort of  puffy. Having never made any hats really and thinking that interfacing or something would be needed to poof it up, I started racking my brain for a solution.  The idea was to cardboard and the glue gun and it would be easy. Like a construction paper crown but Mario-ized …WRONG 🙂 …more like a demented chef had. So thanks to this nice YouTuber and her tutorial I sewed up a great little mario cap.

hallomario3

At the suggestion of a friend “Fire Power Mario ! cool ! what is he going to throw?” and since I am on a craft rampage at the moment, I decided why not make him a Fireball to toss. This time my glue gun was my friend. The fireball is simply felt and fluff and fun!

Also because kids in mustaches are fun, I want to share this crazed blurry photo. Little E is almost like a Wario in the back ground 😀 He randomly ran threw a few shots sporting his own mustache.

hallomariomen

late Halloween post

Standard

Ok so I didn’t get the kids costumes blogged before Halloween. They did get done on time, no  last minute mad sewing dashes. However the photos are all quick on the fly snapshots.

r2d2full

K wanted so bad to be R2D2 ! He loves him ! it was challenging to figure out how to do it.

 There was a lot of brainstorming, I ended up taking apart a collapsible laundry hamper, using the wire for shape. The fabric is an old white curtain.

r2d2hat

The headpiece is paper mache, sculpted over a big mixing bowl. It has been years so i brushed up on my skills here. Its glued onto a baseball cap.

A lot of glue was used. the legs are foam so instead of sewing tubes, i just hot glued the fabric around the foam. Halloween sewing rocks ! I cut every corner possible.

only photo where you can see the legs, in the gym at school

only photo where you can see the legs, in the gym at school

Mr. Lemons did all the details with sharpies donated to the case by the best big sister ever.

r2d2

So there you have it R2D2

r2d2drth

Little E’s was a no sew, just assembled out of things we had and then we bought a Darth Vader mask. He was so happy.

He looked like a bobble head

tis the saeson to be scary

Standard

I love this time of year! Halloween is my favorite! And also a big part of why I sew. Before the blog and all this great online stuff, i would pull the sewing machine out of make costumes for my daughter. I made some for myself as well over the years.

It is great because the creation only had to stay together for one fantastic night.

No Finishing ! No Ironing !

You can fix bad lines with a safety pin !

Hot glue is also aloud 😛

hall

This year I have  a few projects on the go. My own as well as Mr. Lemons are done as we had a Halloween Party to go to on friday. So the last bit of hot glue dried at 3pm and lapels were pinned in place as we were grabbing keys.

hall4

The great thing about our design this year, is it is mostly embellished garments. Mr. Lemons suit jacket with tail started as a 2nd hand trench coat.

hall8

His ruffled shirt is a dress shirt that he owns, embellished with two layers of ruffles. Lace over a sheer white from the scrap bin at the fabric store. It will be easy enough to rip the seams out after the season is over. ( I have certainly ripped out much better sewn and surged seams in the past lol)

hall1

My own top was a tough for me. I just couldn’t decide what to do. I knew I was going to pair my skull corset (bought years ago) with the new skirt. I spent a lot of time looking at Victorian cloths. There was a shirt in the up-cycle pile that I could manipulate and change up. I tried horizontal pleating…ugg. Then shirring …ugg. I added the ruffle and pulled the shirt into an off the shoulder. It worked but was not quite cohesive with the tailored box pleats of the skirt. Back to the inspiration board. And the oober ruffled sleeves were born. I really love them.

hall3hall2

My skirt was made out of a couple of 2nd hand mens shirts. I used the natural shirt tail to make the train. And love how it turned out. the box plaits were a much easier than I thought. I used a tone of spray starch and they are by no means totally uniform, but hey its halloween 😉

hall7

We called our costume “Til Death Do us part” and had a blast at our party !! I’m hoping to get the kids costumes done and blogged in time for All Hallows Eve !

hall5Happy Haunting !!